Substantiation Of The Direction Of Research To Increase The Performance Of Linters

Authors

  • D.U.MADRAKHIMOV
  • Sh.Sh.TUYCHIEV

DOI:

https://doi.org/10.57033/mijournals-2026-9-0281

Keywords:

linter, linting, working chamber, productivity, cotton seed, seed roller, saw cylinder, saw, seed agitator, lint, working chamber volume, seed residence time, cotton processing

Abstract

This article analyzes the development trends in linter design and the main shortcomings of 5LP linters used in cotton ginneries. The study examines the influence of such factors as working chamber volume, seed mass, saw cylinder, and seed agitator speed on linter performance. The discrepancy between the productivity specified in the technical documentation of 5LP linters and the actual productivity achieved under production conditions is also analyzed. The study demonstrates that the residence time of seeds in the working chamber and the density of the seed roller are important factors affecting the linting process. Based on the analysis, a research direction aimed at increasing linter productivity by increasing the volume of the working chamber and, consequently, the mass of the seed roller is proposed. The use of an improved working chamber, 160 saws, and a seed agitator with an increased diameter of up to 200 mm is also proposed to improve the efficiency of lint removal and increase overall linter productivity.

Downloads

Download data is not yet available.

References

1. Coordinated Technology of Primary Cotton Processing (2016). PDI 70-2017. Tashkent: JSC “Paxtasanoat ilmiy markazi”. 91 p. (in Uzbek)

2. Handbook on Primary Cotton Processing (1995). Book II. NPO “Khlopkoprom”. Tashkent: Mehnat. (in Russian)

3. Madrakhimov, D. U. (n.d.). Substantiation of the direction of research to increase the performance of linters. Innovative Technologica, pp. 159–163.

4. Madrakhimov, D. U. & Tuychiev, Sh. Sh. (n.d.). Theoretical analysis of the effect of the linter working-chamber volume on its productivity.

5. Passport of the 5LP Linter (1981). Tashkent: TGSKB for Cotton Ginning. 18 p. (in Russian)

6. Primary Cotton Processing (1978). Moscow: Legkaya industriya. 430 p. (in Russian)

7. Shermatov, M. Sh. (2021). Professional competence of students of higher education institutions. Modern Problems in Education and Their Scientific Solutions, pp. 197–204. (in Russian)

8. Shermatov, M. Sh. (2022). New educational ideas and guidelines in the system of music education. Modern Problems in Education and Their Scientific Solutions, pp. 183–189. (in Uzbek) 675 E-ISSN 3069-8375 The Journal of Interdisciplinary Human Studies

9. Sulaymonov, R. Sh., Karimov, U. K. & Marufkhanov, B. Kh. (2016). Study of foreign- made technologies and equipment for raw cotton ginning, seed linting, and fibre and lint cleaning operated at domestic ginneries, with the issuance of recommendations. Report of JSC “Paxtasanoat ilmiy markazi”. Tashkent. 28 p. (in Russian)

10. Tuychiev, Sh. Sh. & A. (2022). Solutions of some non-traditional problems. Eurasian Journal of Mathematical Theory and Computer Sciences, pp. 65–68. (in Uzbek)

11. Tuychiev, Sh. Sh. & Kh. S. (2022). Improving the saw gin in obtaining high-quality lint. Journal of New Century Innovations, pp. 138–145. (in Uzbek)

12. Tuychiev, Sh. Sh. & Kh. S. (2022). Increasing the productivity of the linting process in lint removal and seed throughput. Journal of New Century Innovations, pp. 146–156. (in Uzbek) 676 E-ISSN 3069-8375

Downloads

Published

2026-06-09

Issue

Vol. 2 No. 9 (2026)

Section

Articles

License

Copyright (c) 2026 D.U.MADRAKHIMOV##common.commaListSeparator##Sh.Sh.TUYCHIEV (##default.groups.name.author##)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Open Access License and Copyright Terms

All articles published in The Journal of Interdisciplinary Human Studies are licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0).

This license permits unrestricted use, distribution, reproduction, and adaptation of the work in any medium or format, provided that the original author(s) and the source are properly credited.

Authors retain full copyright to their published work and grant the journal the right of first publication.

✅ Official license URL:
https://creativecommons.org/licenses/by/4.0/

How to Cite

Substantiation Of The Direction Of Research To Increase The Performance Of Linters. (2026). The Journal of Interdisciplinary Human Studies, 2(9), 281-286. https://doi.org/10.57033/mijournals-2026-9-0281